ShipCalibration.Com is part of MARINE SERVICE ID which provide various On Board Services ;
Annual Calibration,Test and Certification Services for Ship Instrumentations & Ship Automations
Annual Service / Annual Maintenance Service for Electronic Navigation Equipments on Ship
Calibration,Annual Maintenance and Certification are critical processes for
ensuring the accuracy and reliability of equipment on ships. Ships rely on a
wide range of equipment for navigation, communication, safety, and pollution
prevention. To ensure that this equipment is functioning properly and in
compliance with international maritime regulations, it is important to Test,Calibrate and Certify it on a regular basis.
Calibration is the process of comparing the measurements of a piece of equipment to a reference standard. This ensures that the equipment is measuring accurately and that its readings are reliable. For Example, the Oil Discharge Monitoring Equipment (ODME) is a critical piece of equipment on board a ship that is used to monitor the discharge of oily water from the ship's bilge system. ODME is required to be calibrated on a regular basis to ensure that it is providing accurate and reliable readings, because ODME is an essential tool for ship operators to comply with international regulations and prevent the discharge of oily water into the ocean. The accuracy of the ODME is critical for determining the concentration of oil in the discharge and for ensuring that the discharge meets international regulations. Failure to comply with these regulations can result in severe consequences, including fines, detention of the vessel, and damage to the environment.
Certification is the process of verifying that the equipment
meets the requirements of international maritime regulations and is in
compliance with these regulations. Certification ensures that the equipment has
been properly installed and maintained and that it is functioning as intended.
For example, the bilge alarm monitor attached to OWS Oil Water Separator on a ship must be certified to ensure that
it is measuring the oil content in the bilge water accurately and that it is in
compliance with the International Maritime Organization's (IMO) discharge limit
of 15 parts per million (ppm) for oil content in bilge water.
There are several types of equipment on a ship that require
calibration,certification and annual maintenance including Automations Control Systems & Equipments,Instruments Control Systems & Equipments,Navigational Equipment & Systems,Communication Equipment & Systems,Safety Equipment, and Pollution prevention equipment. These types of
equipment include, but are not limited to ; Oil Mist Detector,Gas Detector,Fire Detection System,Gyro Compass,Magnetic Compass,ECDIS,Tank Overfiil Alarm & High Level Alarm,Radar,GPS,ODME Oil Discharge Monitor,Ullage Temperature Interface UTI,VHF Radio,Smoke Detection,Fixed Gas Detection System,Vapour Alarm System,Inert Gas Sytem,Combustible Gas Alarm Monitor,Oily Water Separators (OWS),Fixed Gas Sampling Sytem,etc
Calibration,Certification & Annual Maintenance Service are essential processes
for ensuring the safety and compliance of equipment on ships. Regular Annual Maintenance,Annual Calibration and certification of equipment helps to ensure that it is
functioning properly and providing accurate readings, and that it is in
compliance with international maritime regulations. Regular maintenance and
inspection of equipment is also important to ensure that it continues to
function properly and to prevent failures that could lead to dangerous
situations or pollution of the Marine Ecosystem and Marine Environment.
MARINE SERVICE ID has served Fleet of Bulk Carrier,Chemical Tanker Ship,Oil Tanker Ship,Bulk Carrier,LNG Ship,LPG Ship,AHTS,Ferry,Yacht,Supply Ship,Tanker Ships,Gas Tanker Ships,Crude Tanker Ship, from various Shipping Company Customers at Indonesian Port & Anchorages area.
